Next-in-Thread Next Message

Sad Still Having Problems 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question Problem getting 100BaseT FDX on a REM56G-100 (Zaphod Beeblebrox)
Re: Idea Possible solution (David Levin)
Date: 1999, Dec 17
From: Zaphod Beeblebrox Zaph0d

I am not sure what NWay is...

I am not forcing any of the modes, It appears to get 100FDX when the interface comes up then somehow the link lights go down again and when they come back up it is only at HDX. I am wondering if it is something to do with pump or if it is the driver. I have however tried it without using pump and the noted the following, as soon as I plug in the RealPort card into the pcmcia socket I get all three lights on the switch (link,100,FDX). The first beep is heard and all seems ok, then all three lights go out and the second beep is heard.

Hope this helps, I am running STD RH6.2 I did try the latest pcmcia modules but it didn't make a difference.

Next-in-Thread Next Message

Select this message: Still Having Problems

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Frames Help for HyperNews at 1.10
[ Edit This Forum ]