Next-in-Thread Next Message

More Same message, but with 10baseT ... also "auto negotiation failed" 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question eth0: RX drop,too much done (Mark Harvey)
Date: 1999, Dec 07
From: Serge Winitzki winitzki

Hi,

I'm using Xircom creditcard ethernet 10/100 on a 10baseT network. It works fine except for two messages:

xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
eth0: Xircom: port 0x300, irq 3, hwaddr 00:80:C7:4B:4A:BF
eth0: auto negotation failed; using 10mbs
eth0: media 10BaseT, silicon revision 4
---

and

kernel: xirc2ps_cs: eth0: RX drop, too much done
last message repeated 75 times

---
I have put 'IF_PORT="10baseT"' into "/etc/pcmcia/network.opts" to help it recognize our 10mbs network but it doesn't seem to change anything.

Regards,
Serge

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Just look the other way by David Hinds, 1999, Dec 07

Add Message to: "Same message, but with 10baseT ... also "auto negotiation failed""

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10