Next-in-Thread Next Message

Question RBEM56G-100: eth0: Transmit timed out 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 1999, Nov 30
From: Bjoern Bayard bb

Hi everybody!

I try to get a Kernel 2.2.13, pcmcia 3.1.4 and a Xircom CARDBUS Ethernet 10/100+Modem 56 running.

Meanwhile all starts fine but when I try to use the eth0 interface (e.g. with a ping) I get the following error-message:

eth0: Transmit timed out, status 60660000, CSR12 000000c4, resetting ...

If I use a REM56G-100 all (eth and modem) works fine in the same machine.

Any ideas?

Best regards Björn Bayard

Next-in-Thread Next Message

Select this message: RBEM56G-100: eth0: Transmit timed out

Messages Inline: 1 All Outline: 1 2 All

1. Note Here are the log-messages by Bjoern Bayard, 1999, Dec 02

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]