Next-in-Thread Next Message

None here's the logs 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Sad IBM 10/100 EtherJet Cardbus (John Payne)
Re: None Interrupt conflict? (David Hinds)
Re: Disagree i don't think so (John Payne)
Re: None The system log messages are important (David Hinds)
Date: 1999, Dec 01
From: John Payne jpayne

From the syslog... 
Dec  1 00:30:15 localhost pcmcia: Starting PCMCIA services:
Dec  1 00:30:15 localhost pcmcia:  modules
Dec  1 00:30:15 localhost kernel: Linux PCMCIA Card Services 3.1.5 
Dec  1 00:30:15 localhost kernel:   kernel build: 2.2.12 #1 Fri Nov 26 04:55:18 GMT 1999 
Dec  1 00:30:15 localhost kernel:   options:  [pci] [cardbus] [apm] 
Dec  1 00:30:15 localhost kernel: Intel PCIC probe:  
Dec  1 00:30:15 localhost kernel:   TI 1251A PCI-to-CardBus at bus 0 slot 2, mem 0x50102000, 2 sockets 
Dec  1 00:30:15 localhost kernel:     host opts [0]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 2/4] 
Dec  1 00:30:15 localhost kernel:     host opts [1]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 5/7] 
Dec  1 00:30:15 localhost kernel:     ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms 
Dec  1 00:30:15 localhost pcmcia:  cardmgr.
Dec  1 00:30:16 localhost cardmgr[324]: starting, version is 3.1.5
Dec  1 00:30:16 localhost rc: Starting pcmcia succeeded
Dec  1 00:30:16 localhost cardmgr[324]: watching 2 sockets
Dec  1 00:30:16 localhost kernel: cs: IO port probe 0x1000-0x17ff: excluding 0x15e8-0x15ef 
Dec  1 00:30:16 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137 0x200-0x207 0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7 
Dec  1 00:30:16 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
Dec  1 00:30:16 localhost kernel: cs: cb_alloc(bus 5): vendor 0x115d, device 0x0003 
Dec  1 00:30:16 localhost cardmgr[324]: initializing socket 1
Dec  1 00:30:16 localhost cardmgr[324]: socket 1: IBM 10/100 EtherJet CardBus
Dec  1 00:30:16 localhost inet: inetd startup succeeded
Dec  1 00:30:16 localhost cardmgr[324]: executing: 'insmod /lib/modules/2.2.12/pcmcia/cb_enabler.o'
Dec  1 00:30:16 localhost cardmgr[324]: executing: 'insmod /lib/modules/2.2.12/pcmcia/tulip_cb.o'
Dec  1 00:30:16 localhost kernel: cs: cb_config(bus 5) 
Dec  1 00:30:16 localhost kernel:   fn 0 bar 1: io 0x400-0x47f 
Dec  1 00:30:16 localhost kernel:   fn 0 bar 2: mem 0x6000d000-0x6000d7ff 
Dec  1 00:30:16 localhost kernel:   fn 0 bar 3: mem 0x6000c000-0x6000c7ff 
Dec  1 00:30:16 localhost kernel:   fn 0 rom: mem 0x60008000-0x6000bfff 
Dec  1 00:30:16 localhost kernel: tulip_attach(bus 5, function 0) 
Dec  1 00:30:16 localhost kernel: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) 
Dec  1 00:30:16 localhost kernel: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x400, 00:04:AC:90:6A:09, IRQ 9. 
Dec  1 00:30:16 localhost kernel: eth0:  MII transceiver #0 config 3100 status 7809 advertising 01e1. 
Dec  1 00:30:16 localhost cardmgr[324]: executing: './network start eth0'


And from dmesg:
Linux PCMCIA Card Services 3.1.5
  kernel build: 2.2.12 #1 Fri Nov 26 04:55:18 GMT 1999
  options:  [pci] [cardbus] [apm]
Intel PCIC probe: 
  TI 1251A PCI-to-CardBus at bus 0 slot 2, mem 0x50102000, 2 sockets
    host opts [0]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 2/4]
    host opts [1]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 5/7]
    ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: excluding 0x15e8-0x15ef
cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137 0x200-0x207 0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 5): vendor 0x115d, device 0x0003
ROM image dump:
  image 0: 0x000000-0xffffffff, signature PCIR
cs: cb_config(bus 5)
  fn 0 bar 1: io 0x400-0x47f
  fn 0 bar 2: mem 0x6000d000-0x6000d7ff
  fn 0 bar 3: mem 0x6000c000-0x6000c7ff
  fn 0 rom: mem 0x60008000-0x6000bfff
cs: cb_enable(bus 5)
  bridge io map 0 (flags 0x21): 0x400-0x47f
  bridge mem map 0 (flags 0x1): 0x60008000-0x6000dfff
tulip_attach(bus 5, function 0)
tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x400, 00:04:AC:90:6A:09, IRQ 9.
eth0:  MII transceiver #0 config 3100 status 7809 advertising 01e1.

Do you need anything else?

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None A question and something to try by David Hinds, 1999, Dec 02
(_ None still no luck by John Payne, 1999, Dec 03

Add Message to: "here's the logs"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10