The HOWTO has some comments about Red Hat

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re:

network not starting automatically? (Albert S. Johnston)
Date: 2000, Feb 24
From: David Hinds <dhinds@pcmcia.sourceforge.org>

If you are using a stock Red Hat setup, you should use netconf to configure the interface. As mentioned in the HOWTO, network.opts is not recognized by Red Hat's version of the PCMCIA network script. After booting, check your system log, and the output of ifconfig and route, to see what was done. Or see if "ifup eth0" works. -- Dave

Select this message: The HOWTO has some comments about Red Hat

Messages Inline: Outline:

1. Untitled by Albert S. Johnston, 2000, Feb 24: 1. What card is this, by the way? by David Hinds, 2000, Feb 24

(_ Untitled by Albert S. Johnston, 2000, Feb 24
2. Still need help! by Albert S. Johnston, 2000, Feb 25
3. success! by Albert S. Johnston, 2000, Feb 25: 1. HOWTO explanation by David Hinds, 2000, Feb 25

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Edit This Forum ]