Next-in-Thread Next Message

Sad Untitled 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question network not starting automatically? (Albert S. Johnston)
Re: None The HOWTO has some comments about Red Hat (David Hinds)
Date: 2000, Feb 24
From: Albert S. Johnston sofeise

I read the note on RH in the howto... "your driver" was installed "last" so the hook between linuxconfig and the normal linux stuff is broken... which is fine with me...

nothing abnormal in the boot log... just a couple of complaints about not being yp_bind'd... no surpize there since it cant find the nis server at this point.

ifconfig says

eth0 Link encap:Ethernet HWaddr 00:10:A4:E0:2B:87 inet addr:137.244.203.219 Bcast:137.244.203.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:31 errors:2 dropped:0 overruns:0 carrier:2 collisions:0 txqueuelen:100 Interrupt:11 Base address:0x200

which seems fine to me.

ping says

[root@lysbd-laptop log]# ping 137.244.203.6 PING 137.244.203.6 (137.244.203.6) from 137.244.203.219 : 56(84) bytes of data. From lysbd-laptop.sofcsi.robins.af.mil (137.244.203.219): Destination Host Unreachable From lysbd-laptop.sofcsi.robins.af.mil (137.244.203.219):

I did a route but did not get its o/put captured (i am having to write this in win95)... but it listed 137.244.203.0 which I am not sure is correct. when I run netconfig() I give it 137.244.203.3 as a "gateway"... but since my ip 219 box is on the same side of the gateway as is the ip 6 box, this shouldnt matter... should it?

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None What card is this, by the way? by David Hinds, 2000, Feb 24
(_ None Untitled by Albert S. Johnston, 2000, Feb 24

Add Message to: "Untitled"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10