Next-in-Thread Next Message

Sad Untitled 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question network not starting automatically? (Albert S. Johnston)
Re: None The HOWTO has some comments about Red Hat (David Hinds)
Date: 2000, Feb 24
From: Albert S. Johnston sofeise

I read the note on RH in the howto... "your driver" was installed "last" so the hook between linuxconfig and the normal linux stuff is broken... which is fine with me...

nothing abnormal in the boot log... just a couple of complaints about not being yp_bind'd... no surpize there since it cant find the nis server at this point.

ifconfig says

eth0 Link encap:Ethernet HWaddr 00:10:A4:E0:2B:87 inet addr: Bcast: Mask: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:31 errors:2 dropped:0 overruns:0 carrier:2 collisions:0 txqueuelen:100 Interrupt:11 Base address:0x200

which seems fine to me.

ping says

[root@lysbd-laptop log]# ping PING ( from : 56(84) bytes of data. From ( Destination Host Unreachable From (

I did a route but did not get its o/put captured (i am having to write this in win95)... but it listed which I am not sure is correct. when I run netconfig() I give it as a "gateway"... but since my ip 219 box is on the same side of the gateway as is the ip 6 box, this shouldnt matter... should it?

Next-in-Thread Next Message

Select this message: Untitled

Messages Inline: 1 All Outline: 1 2 3

1. None What card is this, by the way? by David Hinds, 2000, Feb 24
(_ None Untitled by Albert S. Johnston, 2000, Feb 24

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]