Next-in-Thread Next Message

Question Dell I7500 with Xircom CBEM56G-100 - odd problem 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 2000, Feb 25
From: Jakob Frandsen jakobf

I watched this forum before posting this because I don't know
what else to do.

I'm using pcmcia-cs 3.1.11 and kernel 2.2.12-20 (RH 6.1)

After inserting the card, it beeps twice, logs no bad things,
ifconfig shows eth0 just fine, route shows the route just
fine, the light on the adapter does not come on showing "link
integrity". As soon as I try to ping somebody on my net, it
goes "Destination host unreachable" which is a weird error
considering that I route to the net. Running ifconfig after
this attempt shows that some "error packets" has been sent.

It's on IRQ 11 eventhough I have excluded that
in /etc/pcmcia/config.opts

I have tried to do the "ifdown eth0 ; ifup eth0" trick, but
that does not work for me.

Here are the details:

% tail -n 23 /var/log/messages
Feb 25 10:00:00 localhost kernel: cs: cb_alloc(bus 35): vendor 0x115d, device 0x0003
Feb 25 10:00:00 localhost cardmgr[371]: initializing socket 1
Feb 25 10:00:00 localhost cardmgr[371]: socket 1: Xircom CardBus 10/100 Ethernet + 56K Modem
Feb 25 10:00:00 localhost cardmgr[371]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o'
Feb 25 10:00:00 localhost cardmgr[371]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/tulip_cb.o'
Feb 25 10:00:00 localhost cardmgr[371]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/serial_cb.o'
Feb 25 10:00:00 localhost kernel: cs: cb_config(bus 35) 
Feb 25 10:00:00 localhost kernel:   fn 0 bar 2: mem 0x60013000-0x600137ff 
Feb 25 10:00:00 localhost kernel:   fn 0 bar 3: mem 0x60012000-0x600127ff 
Feb 25 10:00:00 localhost kernel:   fn 1 bar 1: io 0x280-0x287 
Feb 25 10:00:00 localhost kernel:   fn 1 bar 2: mem 0x60011000-0x600117ff 
Feb 25 10:00:00 localhost kernel:   fn 1 bar 3: mem 0x60010000-0x600107ff 
Feb 25 10:00:00 localhost kernel:   fn 0 bar 1: io 0x200-0x27f 
Feb 25 10:00:00 localhost kernel:   fn 0 rom: mem 0x6000c000-0x6000ffff 
Feb 25 10:00:00 localhost kernel:   fn 1 rom: mem 0x60008000-0x6000bfff 
Feb 25 10:00:00 localhost kernel: tulip_attach(bus 35, function 0) 
Feb 25 10:00:00 localhost kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) 
Feb 25 10:00:00 localhost kernel: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x200, 00:10:A4:DF:E1:E4, IRQ 11. 
Feb 25 10:00:00 localhost kernel: eth0:  MII transceiver #0 config 3100 status 7809 advertising 01e1. 
Feb 25 10:00:00 localhost kernel: serial_attach(bus 35, fn 1) 
Feb 25 10:00:00 localhost kernel: tty01 at 0x0280 (irq = 11) is a 16550A 
Feb 25 10:00:00 localhost cardmgr[371]: executing: './network start eth0'
Feb 25 10:00:01 localhost cardmgr[371]: executing: './serial start ttyS1'

% ifconfig eth0

eth0      Link encap:Ethernet  HWaddr 00:10:A4:DF:E1:E4  
          inet addr:192.168.168.5  Bcast:192.168.168.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:11 Base address:0x200 

% route -n

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.168.5   0.0.0.0         255.255.255.255 UH    0      0        0 eth0
192.168.168.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo

% ping 192.168.168.10

PING 192.168.168.10 (192.168.168.10) from 192.168.168.5 : 56(84) bytes of data.
From 192.168.168.5: Destination Host Unreachable
From 192.168.168.5: Destination Host Unreachable
From 192.168.168.5: Destination Host Unreachable

--- 192.168.168.10 ping statistics ---
4 packets transmitted, 0 packets received, +3 errors, 100% packet loss

% ifconfig eth0

eth0      Link encap:Ethernet  HWaddr 00:10:A4:DF:E1:E4  
          inet addr:192.168.168.5  Bcast:192.168.168.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:6 dropped:0 overruns:0 carrier:6
          collisions:0 txqueuelen:100 
          Interrupt:11 Base address:0x200 


I can post more info if needed. Thank you is advance.

Next-in-Thread Next Message

Select this message: Dell I7500 with Xircom CBEM56G-100 - odd problem

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Question: Dell I7500 with Xircom CBEM56G-100 - odd problem by David Hinds, 2000, Feb 25
(_ Ok It works now - stupid faulty cable. : by Jakob Frandsen, 2000, Feb 28

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]