Next-in-Thread Next Message

Question Problems with Kernel 2.2.13 and pcmcia 3.1.3 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 1999, Nov 04
From: Stefan Kapfhammer StefanKapfhammer

Whilst Kernel 2.2.10 and pcmcia 3.1.3 worked fine, I upgraded to Kernel 2.2.13 (still recompiled pcmcia 3.1.3 after upgrade) and now it says I have the serial at ttyS1 instead of ttyS0 as it was before.

On ttyS1 I get an I/O Error when trying to access the port and ttyS0 is not available for modem.

I have a Toshiba Tecra 8000 with a RBEM56-100BTX, in the Tosh-BIOS I set the PCMCIA to Cardbus 16-Bit so the 3.1.3 sees a ToPIC95B Chipset instead of the troublemaking ToPIC97 (that worked already until the Kernel-upgrade.

The new Kernel has the serial and shared serial compiled in.

What did I wrong?

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. Question Problems with Kernel 2.2.12/RH 6.1/Xircom RBEM56G by Rick Knight, 1999, Nov 06
1. Sad Problems with Kernel 2.2.13/RH 6.1/Xircom RBEM56G also by Ron Golan, 1999, Nov 08
(_ Ok Modems and ttyS* by Philippe Henry, 1999, Nov 08
2. Ok Irq init and ttyS* ports at boot time. by Philippe Henry, 1999, Nov 10

Add Message to: "Problems with Kernel 2.2.13 and pcmcia 3.1.3"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10