Question: Problems with Kernel 2.2.13 and pcmcia 3.1.3 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 1999, Nov 04
From: Stefan Kapfhammer StefanKapfhammer

Whilst Kernel 2.2.10 and pcmcia 3.1.3 worked fine, I upgraded to Kernel 2.2.13 (still recompiled pcmcia 3.1.3 after upgrade) and now it says I have the serial at ttyS1 instead of ttyS0 as it was before. On ttyS1 I get an I/O Error when trying to access the port and ttyS0 is not available for modem. I have a Toshiba Tecra 8000 with a RBEM56-100BTX, in the Tosh-BIOS I set the PCMCIA to Cardbus 16-Bit so the 3.1.3 sees a ToPIC95B Chipset instead of the troublemaking ToPIC97 (that worked already until the Kernel-upgrade. The new Kernel has the serial and shared serial compiled in. What did I wrong?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Question: Problems with Kernel 2.2.12/RH 6.1/Xircom RBEM56G by Rick Knight, 1999, Nov 06

1. Sad: Problems with Kernel 2.2.13/RH 6.1/Xircom RBEM56G also by Ron Golan, 1999, Nov 08

(_ Ok: Modems and ttyS* by Philippe Henry, 1999, Nov 08

2. Ok: Irq init and ttyS* ports at boot time. by Philippe Henry, 1999, Nov 10

[ Add Message ]  to: "Problems with Kernel 2.2.13 and pcmcia 3.1.3"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]