[ Next-in-Thread ]  [ Next Message ] 

I think it is really a Toshiba issue 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question: Xircom CE2 not identified on Toshiba 4030CDT (Tony Kerr)
Date: 2000, Mar 21
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

It might be useful to see the kernel messages.  Also, what does
"cardctl status" report, right after booting with the card in?

One option (not really a fix, but a workaround) might be to play with
the PCMCIA bridge mode in your BIOS setup menu.  You should be able to
choose between three modes: "PCIC", "Auto", and "CardBus".  Try each
setting.  The "PCIC" mode should be ok, but will prevent you from
using 32-bit CardBus cards.  Which may not even be a concern.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. More: Here are the kernel messages. by Tony Kerr, 2000, Mar 22
2. Idea: Yes, swapping slots DOES make a difference! by Tony Kerr, 2000, Mar 24

[ Add Message ]  to: "I think it is really a Toshiba issue"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]