[ Next-in-Thread ]  [ Next Message ] 

msg after insertion 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question: RBE100, and insmod error (Dolapo Falola)
Re: Not enough information (David Hinds)
Re: Untitled (Dolapo Falola)
Re: The wrong driver is being loaded (David Hinds)
Re: Untitled (Dolapo Falola)
Re: Well, it doesn't really matter (David Hinds)
Re: Untitled (Dolapo Falola)
Date: 2000, Apr 06
From: Dolapo Falola qmac 

this is what dmesg says after i remove and insert the card
tulip_detach(eth0())
cs:cb_disable(bus 5)
cs:cb_release(bus 5)
cs: cb_free(bus 5)
tulip_reap()
cs: cb_alloc(bus 5): vendor 0x115d, device 0x003
ROM image dump:
  image 0:0x000000-0xffffffff, signature PCIR
cs: cb_config(bus 5)
  fn 0 bar 1: io 0x400-0x47f
  fn 0 bar 2: mem 0x60000d000-0x60000d7ff
  fn 0 bar 3: mem 0x60000c000-0x60000c7ff
  fn 0 rom: mem 0x6000080000-0x60000bfff
cs: cb_enable(bus 5)
  bridge io map 0 (flags 0x21): 0x400-0x47f
  bridge mem map 0 (flags 0x1): 0x6000080000-0x60000dfff
tulip_reap()
tulip_attach(bus 5, function 0)
tulip.c:v0.91g-ppc 7.16.99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x400, 00:10:A4:E0:24:69, IRQ 11.
eth0: MII transceive #0 config 3100 status 7809 advertising 01e1

hope that means something

Thanks

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Re: msg after insertion by David Hinds, 2000, Apr 06
(_ Xircom RBE 10/100 BTX cardbus by Paulo E. Abreu, 2000, Jun 09

[ Add Message ]  to: "msg after insertion"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]