Next-in-Thread Next Message

Question RBEM56G-100 problems with pcmcia 3.1.14 and kern 2.2.14 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 2000, Apr 21
From: Brad Langhorst bwlang

I'm trying to get this card working...

When I insert it, I hear two high beeps very close together. The link light on the card is green and the activity light flashes. Cardinfo lists the card properly. eth0 exists and is bound to the proper address In other words it appears to be working.

However, when i ping any address except my own i get no response. Nothing seems to get logged in /var/log/messages and i get no visible errors - just no responses.

The card is using irq 1l and IO 0x400-0x487 it is listed as ready and has devices eth0, ttyS2

I get about 30 lines in /var/log/messages but nothing unusual.

Any suggestions?

thanks

brad

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Question: RBEM56G-100 problems with pcmcia 3.1.14 and kern 2.2.14 by David Hinds, 2000, Apr 21
1. Ok promisc mode worked! by Brad Langhorst, 2000, Apr 21
1. Question Untitled by kato, 2000, Jun 20
2. Angry still NOT fixed in latest 3.1.16 snapshot by Stewart Allen, 2000, Jun 06
1. None So maybe it is not actually as easy as you think by David Hinds, 2000, Jun 07

Add Message to: "RBEM56G-100 problems with pcmcia 3.1.14 and kern 2.2.14"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10