Next-in-Thread Next Message

Question RBEM56G-100 & Red Hat 6.2 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 2000, May 03
From: Marco A. Calamari marcoc

I'm trying to use a Xircom Cardbus ethernet 10/100+modem 56 (RBEM56G-100) with an Acer Travelmate 515TE and RedHat 6.2 (kernel 2.2.14)

The card self initialize with tulip_ce, and seems to work, autoselecting irq2 & io200.

Ifconfig show hardware address and (using promiscuos mode, as suggested by another message here) I can see the packet count rise.

The problem is that ping doesn't work, and all packet read are
 dropped; packet written give an error.

I suspected that the card is working at 100Mb, and all my network is 10Mb, but if connect to a 100Mb port the amber light detect the change, bu the situation (dropped all packet) doesn't change

I updated firmware to 2.66, but without any change.

Also using xirc2ps_cs give no change

Any idea ? Thanks a lot for your time.

Have a good day. Marco

Next-in-Thread Next Message

Select this message: RBEM56G-100 & Red Hat 6.2

Messages Inline: 1 All Outline: 1 2 All

1. None Need more detailed information by David Hinds, 2000, May 03
1. None Re: Need more detailed information by Marco A. Calamari, 2000, May 04
1. None SOLUTION ! by Marco A. Calamari, 2000, May 05
2. Ok SOLUTION! (part two) by Marco A. Calamari, 2000, May 05

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]