I'm trying to use a Xircom Cardbus ethernet 10/100+modem 56 (RBEM56G-100) with an Acer Travelmate 515TE and RedHat 6.2 (kernel 2.2.14)
The card self initialize with tulip_ce, and seems to work, autoselecting irq2 & io200.
Ifconfig show hardware address and (using promiscuos mode, as suggested by another message here) I can see the packet count rise.
The problem is that ping doesn't work, and all packet read are dropped; packet written give an error.
I suspected that the card is working at 100Mb, and all my network is 10Mb, but if connect to a 100Mb port the amber light detect the change, bu the situation (dropped all packet) doesn't change
I updated firmware to 2.66, but without any change.
Also using xirc2ps_cs give no change
Any idea ? Thanks a lot for your time.
Have a good day. Marco
[ Edit This Forum ]