Next-in-Thread Next Message

Agree OmniBook 4150 problem ??? 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Sad RBEM56G-100BTX w/ RedHat Linux 6.2 (Mark Ambrose)
Re: Sad Me too! must be something with Omnibook 4150s... (Mauro Cicognini)
Date: 2000, May 15
From: Mark Ambrose <caffeine23@hotmail.com>

Yes...your symptoms sound exactly the same as mine. I have an
OmniBook PIII 650MHz, 256MB RAM, 18.1GB HDD...seems that the
version of OmniBook doesn't make a difference.

I have successfully used this card under both Windows '98 and
Windows 2000...no problems with either of those. I have also
installed the latest PCMCIA drivers (May 12 release) and this
didn't fix it either...so I can't see any point in either of
you trying this...but by all means do if you think it will 
help.

I compiled the PCMCIA driver with both PnP support and no PnP
support and this didn't change anything either. 
/var/log/messages shows that the card was detected fine (1st
beep) but it fails to configure it properly (no 2nd beep).

If anyone has any other ideas with this, I would certainly 
appreciate the input....

Like before, I am running a stock RedHat 6.2 kernel with the
latest PCMCIA package installed (May 12 release from 
sourceforge FTP)....

Thanks 

Mark

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None I don't think I quite understand the issue by David Hinds, 2000, May 15
(_ Feedback Tried diff'ing the messages, but no clues by Mauro Cicognini, 2000, May 16
(_ Feedback 4150B's flakier than 4150A's by Dave Worthy, 2000, Jun 14

Add Message to: "OmniBook 4150 problem ???"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10