|
Hi,
I hope someone can point me in the right direction with this. Distribution: SuSE 6.4 Kernel: Stock SuSE 6.4 - 2.2.14 PCMCIA version: 3.1.15 Card: Xircom CBE-10/100BTX
I now have a recognised card after adding card "Xircom CardBus 10/100 Ethernet" manfid 0x0105, 0x0102 bind "tulip_cb" to the /etc/pcmcia/config file I can ping my address on the laptop, however when I can't ping any other address it just sits there doing nothing. I had a look in /var/log/messages and I was getting the following lines repeated continuously:
May 14 09:01:41 legolas kernel: eth0: Tx hung, 25 vs. 1. May 14 09:01:41 legolas kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff00008, resetting... May 14 09:01:47 legolas kernel: eth0: Tx hung, 25 vs. 1. May 14 09:01:47 legolas kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ffa0008, resetting... May 14 09:01:53 legolas kernel: eth0: Tx hung, 25 vs. 1. May 14 09:01:53 legolas kernel: eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000 fffbffff 8ff00008, resetting... When I removed the card and re-inserted it I got the following (I don't know if it is relevant):
May 14 09:02:28 legolas kernel: tulip_detach(eth0) May 14 09:02:28 legolas kernel: cs: cb_disable(bus 32) May 14 09:02:28 legolas kernel: cs: cb_release(bus 32) May 14 09:02:28 legolas kernel: cs: cb_free(bus 32) May 14 09:02:28 legolas cardmgr[474]: shutting down socket 0 May 14 09:02:28 legolas cardmgr[474]: executing: './network stop eth0' May 14 09:02:28 legolas cardmgr[474]: + ./network: /etc/pcmcia/wireless.opts: line 61: syntax error near unexpected token `(N' May 14 09:02:28 legolas cardmgr[474]: + ./network: /etc/pcmcia/wireless.opts: line 61: ` INFO="Netwave example (Netwave default settings)' May 14 09:02:28 legolas cardmgr[474]: executing: 'modprobe -r tulip_cb' May 14 09:03:23 legolas kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 May 14 09:03:23 legolas cardmgr[474]: initializing socket 0 May 14 09:03:23 legolas kernel: ROM image dump: May 14 09:03:23 legolas kernel: image 0: 0x000000-0x0001ff, signature PCIR May 14 09:03:23 legolas cardmgr[474]: socket 0: Xircom CardBus 10/100 Ethernet May 14 09:03:24 legolas cardmgr[474]: executing: 'modprobe tulip_cb' May 14 09:03:24 legolas kernel: cs: cb_config(bus 32) May 14 09:03:24 legolas kernel: fn 0 bar 1: io 0x400-0x47f May 14 09:03:24 legolas kernel: fn 0 bar 2: mem 0x600c0000-0x600c007f May 14 09:03:24 legolas kernel: fn 0 rom: mem 0x60080000-0x600bffff May 14 09:03:24 legolas kernel: cs: cb_enable(bus 32) May 14 09:03:24 legolas kernel: bridge io map 0 (flags 0x21): 0x400-0x47f May 14 09:03:24 legolas kernel: bridge mem map 0 (flags 0x1): 0x60080000-0x600c0fff May 14 09:03:24 legolas kernel: tulip_attach(device 20:00.0) May 14 09:03:24 legolas kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) May 14 09:03:24 legolas kernel: eth0: Digital DS21143 Tulip rev 48 at 0x400, EEPROM not present, 00:4C:69:6E:75:79, IRQ 11. May 14 09:03:24 legolas cardmgr[474]: executing: './network start eth0' May 14 09:03:24 legolas cardmgr[474]: + ./network: /etc/pcmcia/wireless.opts: line 61: syntax error near unexpected token `(N' May 14 09:03:24 legolas cardmgr[474]: + ./network: /etc/pcmcia/wireless.opts: line 61: ` INFO="Netwave example (Netwave default settings)' If anyone needs any extra information please ask. I have never been able to get this card going under Linux (I have tried previously) Thanks, Andrew Branch.
|
Messages