Next-in-Thread Next Message

Ok Newbie advise for Xircom RBEM56G 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question Can anyone advise a newbie on getting RBEN56G working ? (Gordon Licence)
Date: 2000, Jun 10
From: Alberto Gonzalez Palomo matmota

> [...] am running SuSE 6.4 on a Dell Latitude CPi 400XT with
> a RBEM56G 10/100 Ethernet + Modem 56 PCMCIA card.
> SuSE has installed OK, but has not
> picked up the Ether or Modem card - I'm not too fussed about the
> ISDN.
> [...]
> (a) Whether the RBEM56G card is supported ?

  Sure as hell ;) I'm using one right now to send this message.

> (b) If it is, what do I need to do to get it working ?

  A few days ago I tried SuSE 6.4 and it got my card perfectly. I don't remember if I chose any special option in the install menu. Some Linux distros have an option in the install menu for activating PCMCIA support before installing, to be able to get the packages through it.

  You only need a recent version of pcmcia-cs. The one in SuSE 6.4 is more than adequate.
  Browse the SuSE help (in KDE, the chamaleon icon) for instructions on installing PCMCIA support.

  Once installed, insert the card, and it will make one 'beep', wich means the card has been recognized. A while later it will make another one: it if it sounds the same as the first, it's OK. If it has a lower pitch, or doesn't sound at all (will do if given enough time), you still have to configure your Ethernet connection.

  That's it: the card works. Read some docs and you will have it working right. The only quirk is that you could have to make a 'ifconfig eth0 promisc' (as root) to make the Ethernet part working right. This is documented in various messages above.

  And, of course, don't forget to "Read Those Fine Manuals" ;) (PCMCIA-Howto, SuSE Help, and the other messages in this list, at least)

Next-in-Thread Next Message

Select this message: Newbie advise for Xircom RBEM56G

Messages Inline: 1 All Outline: 1 2 All

1. Question Same problem by Vincent Nijs, 2000, Jun 12
(_ None Try setting promiscuous mode by David Hinds, 2000, Jun 12

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]