Next-in-Thread Next Message

Question Xircom CEM56-100 not resuming 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 2000, Jun 05
From: Andrew Pickin <Andrew.Pickin@bullgod.co.uk>

I have a problem with my Xircom not resuming.
This is not a problem with my unbranded NE2000,
under RH 6.1 & 6.2.
If i restart cardmgr the card wakes-up.
I'm lost, the follow output has the xircom in
slot 1.

[root@wintermute pcmcia-cs-3.0.14]# cardctl config
Socket 0:
  Vcc = 5.0, Vpp1 = 0.0, Vpp2 = 0.0
  Interface type is memory and I/O
  IRQ 9 is exclusive, level mode, enabled
  Function 0:
    Config register base = 0x03f8
      Option = 0x61, status = 0000
    I/O window 1: 0x0320 to 0x033f, auto sized
Socket 1:
  Vcc = 5.0, Vpp1 = 0.0, Vpp2 = 0.0
  Interface type is memory and I/O
  IRQ 3 is dynamic shared, level mode, enabled
  Speaker output is enabled
  Function 0:
    Config register base = 0xff80
      Option = 0x67, status = 0x08, pin = 0000
    I/O window 1: 0x0300 to 0x030f, 16 bit
    I/O window 2: 0x02e8 to 0x02ef, 8 bit

Do I need to reset the IRQ (to 9) if so how?

THX 

Andrew Pickin

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 2 3 All

1. None Known bug by David Hinds, 2000, Jun 05

Add Message to: "Xircom CEM56-100 not resuming"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10