I have a Mentor PCMCIA 10/100 Adapter. I paste what the disk driver said about the PCMCIA Card: " The 10/100M Fast-Ethernet PCMCIA Adapter works with the INTEL PCMCIA (PCIC) or compatible controler. " At the first time it /var/log/messages said that the card were not suported, and i added an entry on /etc/pcmcia/config with my card manid and especify bind "xirc2cs_ps" but the xirc2_ps_cs.o module doesnt want to install itself. /var/log/messages said that:
Jun 13 17:00:02 Bolo cardmgr: Initializing socket 1 Jun 13 17:00:02 Bolo Kernel: cs: memory probe 0xa0000000-0xa0fffffff: clean Jun 13 17:00:02 Bolo cardmgr: socket 1: PCMCIA FAST-Ethernet , Jun 13 17:00:02 Bolo cardmgr: executing: `modprobe xirc2ps_cs` Jun 13 17:00:02 Bolo kernel: cs: xirc2ps_cs: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) Jun 13 17:00:02 Bolo kernel: cs: xirc2ps_cs: Unknown Card Manufactured ID: 0xffff Jun 13 17:00:02 Bolo cardmgr: get dev info on socket 1 failed: No such device
Can anybody help me to install properly this f***** card? I think there must be a way to tell the module to not check manid of the card, but i dont know how. Thanks in advance.