Next-in-Thread Next Message

Question I have lot of problemas with an Intel Conmpatible Card (Mentor 10/100 PCMCIA Card) 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 2000, Jun 13
From: Cesar Gonzalez Cesar

Hi all:

I have a Mentor PCMCIA 10/100 Adapter. I paste what the disk driver said about the PCMCIA Card: " The 10/100M Fast-Ethernet PCMCIA Adapter works with the INTEL PCMCIA (PCIC) or compatible controler. " At the first time it /var/log/messages said that the card were not suported, and i added an entry on /etc/pcmcia/config with my card manid and especify bind "xirc2cs_ps" but the xirc2_ps_cs.o module doesnt want to install itself. /var/log/messages said that:

Jun 13 17:00:02 Bolo cardmgr[1418]: Initializing socket 1
Jun 13 17:00:02 Bolo Kernel: cs: memory probe 0xa0000000-0xa0fffffff: clean
Jun 13 17:00:02 Bolo cardmgr[1418]: socket 1: PCMCIA FAST-Ethernet ,
Jun 13 17:00:02 Bolo cardmgr[1418]: executing: `modprobe xirc2ps_cs`
Jun 13 17:00:02 Bolo kernel: cs: xirc2ps_cs: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
Jun 13 17:00:02 Bolo kernel: cs: xirc2ps_cs: Unknown Card Manufactured ID: 0xffff
Jun 13 17:00:02 Bolo cardmgr[1418]: get dev info on socket 1 failed: No such device

Can anybody help me to install properly this f***** card? I think there must be a way to tell the module to not check manid of the card, but i dont know how. Thanks in advance.

Regards.

Bolo.

Next-in-Thread Next Message

Select this message: I have lot of problemas with an Intel Conmpatible Card (Mentor 10/100 PCMCIA Card)

Messages Inline: 1 All Outline: 1 2 All

1. None This is not a Xircom card by David Hinds, 2000, Jun 13

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]