This driver is a module for pcmcia-cs-2.9.10 and above. It implements
the necessary interface for HiSax (which became part of the standard
kernel since 2.0.31) to access the teles S0 ISDN card.

Note that 2.1 kernels are broken with respect to teles pcmcia (someone mixed
up some io calculations). So unpatched versions will not work!

See
  http://home.wtal.de/petig/
for more (recent) information.

If you need additional information or feel that something important is
missing you might vote for that (mailto:christof.petig@wtal.de).

Patched versions of HiSax support an automatic configuration scheme;
   #define NEW_HISAX
might work for you, which passes irq, protocol, io to hisax.
A patch is only available for 2.1.98 so far ... 2.1.120+ and 2.0.35 versions
are coming.

Unless this is ready, please copy the port and irq mapping reported on
syslog (/var/adm/syslog, F10 on SuSE).
Transfer them into /etc/conf.modules.

I'm working on a better support, please feel free to ask for it (increases
priority).

Sorry this patch hasn't made it's way into the standard package, so please
apply it ( cd pcmcia-cs-3.x.y ; patch -s <where_you_put_it )!
-------------------------CUT HERE-----------------------------------
--- etc/config  Fri Oct 10 08:28:21 1997
+++ etc/config  Mon Nov 24 20:50:42 1997
@@ -64,6 +64,9 @@
 device "iscc_cs"
   class "iscc" module "iscc_cs"
 
+device "teles_cs"
+  class "teles" module "teles_cs"
+
 #
 # Ethernet adapter definitions
 #
@@ -785,6 +788,10 @@
 card "IBM Smart Capture Card"
   version "IBM Corp.", "Video Capture"
   bind "iscc_cs"
+
+card "TELES S0/PCMCIA ISDN"
+  version "TELES", "S0/PC"
+  bind "teles_cs"
 
 # Include local configuration settings
 source ./config.opts
------------------------- CUT HERE --------------------------------