Section: Maintenance Commands (8)
Updated: 1999/10/25 19:50:45
Return to Main Contents
cardctl - PCMCIA card control utility
is used to monitor and control the state of PCMCIA sockets. If a
socket number is specified, the command will be applied to just one
socket; otherwise, all sockets will be affected.
is also used to select between multiple PCMCIA configuration schemes.
The current scheme name is passed to the device option scripts as part
of the ``device address'', so the scripts can use it to choose between
is executed by root, all commands are available. If it is executed by
an unpriviledged user, only the informational commands are accessible.
Display the current socket status flags.
Display the socket configuration, including power settings, interrupt
and I/O window settings, and configuration registers.
Display card identification information, including product
identification strings, manufacturer ID codes, and function ID codes.
Shut down and then disable power for a socket.
Restore power to a socket, and re-configure for use.
Send a reset signal to a socket, subject to approval by any drivers
already bound to the socket.
Notify all client drivers that this card will be ejected, then cut
power to the socket.
Notify all client drivers that this card has just been inserted.
If no scheme name is given,
will display the current PCMCIA configuration scheme. If a scheme
name is given,
will unconfigure all PCMCIA devices, and reconfigure for the new
Show version information and exit.
- -c config
Look for the card configuration database and card configuration
scripts in the specified directory, instead of
- -f scheme
Use the specified file to keep track of the current configuration
scheme, instead of
- -s stab
Read current socket information from the specified file, instead of
David Hinds - email@example.com
- SEE ALSO
This document was created by
using the manual pages.
Time: 23:01:57 GMT, December 21, 1999