AHA152X_CS
Section: Devices and Network Interfaces (4)
Updated: 1999/10/25 19:50:45
Index
Return to Main Contents
NAME
aha152x_cs - Adaptec AHA-152X compatible PCMCIA device driver
SYNOPSIS
insmod aha152x_cs.o
[pc_debug=n]
[irq_list=i,j,...]
[host_id=n]
[reconnect=n]
[parity=n]
[synchronous=n]
[reset_delay=n]
[ext_trans=n]
DESCRIPTION
aha152x_cs
is the low-level Card Services driver for various PCMCIA SCSI adapters
that are compatible with the Adaptec AHA-152X host adapter. These
include the New Media Bus Toaster, the Adaptec AHA-1460, and various
other OEM cards.
PARAMETERS
- pc_debug=n
-
Selects the PCMCIA debugging level. This parameter is only available
if the module is compiled with debugging enabled. A non-zero value
enables debugging.
- irq_list=i,j,...
-
Specifies the set of interrupts that may be allocated by this driver.
- host_id=n
-
Specifies the SCSI ID of the host adapter. The default host ID is 7.
- reconnect=n
-
Enables support for disconnect/reconnect, if non-zero.
The default is 1 (true).
- parity=n
-
Enables SCSI parity checking. The default is 1 (true).
- synchronous=n
-
Enables negotiation of synchronous SCSI transfers.
The default is 0 (false).
- reset_delay=n
-
Specifies a delay for SCSI bus resets, in 10 millisecond intervals.
The default is 100.
- ext_trans=n
-
Enables the ``extended translation'' scheme for partition tables of
drives larger than 1 GB.
AUTHOR
David Hinds - dhinds@pcmcia.sourceforge.org
SEE ALSO
cardmgr(8), pcmcia(5).
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- PARAMETERS
-
- AUTHOR
-
- SEE ALSO
-
This document was created by
man2html,
using the manual pages.
Time: 23:01:57 GMT, December 21, 1999